How do you create an aircraft in Catia?

How do you create an aircraft in Catia?

CREATING AN AEROPLANE in CATIA

1. Step 1: Open CATIA. Open CATIA V5.
2. Step 2: CREATE PLANES.
3. Step 3: MULTI SECTIONS SURFACE.
4. Step 4: CREATING FRONT SECTION OF THE PLANE.
5. Step 5: CREATING WINGS.
6. Step 6: CREATING WINDOWS AND DOORS.
7. Step 7: CREATING VERTICAL STABILIZER.
8. Step 8: CREATING RUDDER.

How do you calculate fuselage length?

Fuselage length is 75% wing length. Nose length from prop to wing leading edge is 20% fuselage length. Tail length from wing back edge to horizontal surface front edge is 40% fuselage length. Fuselage height 10% to 15% of fuselage length.

What are the types of fuselage?

4 Common Types of Airplane Fuselages

• #1) Truss. Also known as truss structure, truss is a common type of airplane fuselage.
• #2) Monocoque. Some airplanes have a monocoque fuselage.
• #3) Semi-Monocoque. In addition to monocoque, there are semi-monocoque airplane fuselages.
• #4) Geodesic.

What are the parts of fuselage?

The fuselage can be divided into three areas: crown, sides and bottom. Predominant loads during flight are tension in the crown, shear in the sides and compression in the bottom. These loads are caused by bending of the fuselage due to loading of the wings during flight and by cabin pressure.

What is the diameter of the fuselage?

The typical fuselage diameter is 5 to 6 m (16 to 20 ft). In the typical wide-body economy cabin, passengers are seated seven to ten abreast, allowing a total capacity of 200 to 850 passengers.

What are the components of fuselage?

The fuselage of a transport aircraft is a cylindrical shell consisting of the skin, longitudinal stringers and longerons, and transverse frames and bulkheads.

What is the purpose of fuselage?

fuselage, central portion of the body of an airplane, designed to accommodate the crew, passengers, and cargo. It varies greatly in design and size according to the function of the aircraft.

What are the 2 general types of fuselage construction?

There are two general types of fuselage construction—welded steel truss and monocoque designs. The welded steel truss was used in smaller Navy aircraft, and it is still being used in some helicopters. The monocoque design relies largely on the strength of the skin, or covering, to carry various loads.

What’s included in the CATIA V5 tutorials?

This tutorials includes an introduction of the main features in the 3D design software package Catia V5. Beside the basic tools of 3D design, a number of exercises and examples point to different construction strategies in several applications.

How do I adjust the speed in CATIA V5?

For Abscissa, select Mechanism.1\\Joints\\Cylindrical.2\\LengthAngle For Ordinate, select Speed-Acceleration.2\\LinearSpeed 4-34 CATIA V5 Tutorials in Mechanism Design and Animation Drag the scroll bar all the way to the right or simply click on Press OK to close the box.

How was the shell of fuselage structure designed in solid works?

The shell of fuselage structure designed in solid works by estimating the skin thickness using Denis Howe’s method the thickness of skin is 2mm. Fig.4 Bulkhead B) Bulkheads A bulkhead is a wall inside a craft such as a ship, airplane, or spacecraft.

How do I insert a kinematics simulation in CATIA V5?

4-18 CATIA V5 Tutorials in Mechanism Design and Animation When the scroll bar in the Kinematics Simulation pop up box reaches the right extreme end, select the Insert button in the Edit Simulation pop up box shown above. This activates the video player buttons shown .