Interesting

How do I reset my ilom?

How do I reset my ilom?

Reset Oracle ILOM

  1. To reset the Oracle ILOM server SP from the web interface, click Maintenance –> Reset SP –> Reset SP.
  2. To reset the Oracle ILOM server SP from the CLI, type: -> reset /SP.

How do I get back to ilom from console?

To switch back to Oracle ILOM, type ESC ( (the Esc key followed by ( ).

How do you clear FMA logs on ilom?

How to Clear Faults Using the Oracle ILOM Command-Line Interface

  1. Log in to the Oracle ILOM CLI.
  2. Use the following command to clear the fault for a specific component. –>set pathtocomponent clear_fault_action=true. where pathtocomponent is the path to the component for which you want to clear the fault. For example:

How do I reset my ilom Solaris password?

Change the Oracle ILOM Root Password (Oracle ILOM CLI)

  1. Log in to the Oracle ILOM CLI. See Log Into the Oracle ILOM CLI (Remote).
  2. Type. -> set /SP/users/root password Enter new password: ******** Enter new password again: ********

What does ilom mean?

Integrated Lights Out Manager (ILOM) 2.0 is the system management firmware you can use to monitor, manage, and configure a variety of Sun server platforms.

How do you send a break from ilom?

To Use Ilom Set /Host Send_Break_Action=Break, Start /Sp/Console Commands, Or Break Key – Sun Oracle Netra T5440 Administration Manual. command prompt using the stop /SYS command. pressing the Break key.

What is an ilom?

How do I check ilom hardware faults?

How to View Fault Status Using the Oracle ILOM Command-Line…

  1. Use the command: -> show /SP/faultmgmt. You see output similar to the following: -> show /SP/faultmgmt /SP/faultmgmt Targets: shell 0 (/SYS) 1 (/SYS/BL1) 2 (/SYS/BL2) Properties: Commands: cd show.
  2. Use the command: ->show faulty.

How do you clear faults in Alom?

The clearfault command enables the system administrator to repair a host-reported fault manually so that it is not displayed by the showfaults command.

  1. In this example, the showfaults command identifies a host-detected fault.
  2. Including the -v (verbose) option to the showfaults command.

How do I assign an IP address to ilom?

To set a static IP address for the ILOM using the CLI and a serial line connection, do the following.

  1. Establish a serial connection to the ILOM.
  2. Log in to the ILOM.
  3. Type the following command to set the working directory.
  4. Type the following commands to specify a static Ethernet configuration.
  5. Log out of the ILOM.

How to clear locked M-files in matlabrc?

The hidden figures are closed by “close all hidden”. Clearing the locked M-files can be controlled by unlocking all files loaded into memory. The default properties are set to the factory values at first and then adjusted to their local values in MATLABRC. Script file TotalReset.m (not as function!) % blocks the execution. Fallback:

Is matlabrc a good way to restore the default settings?

Yes, using matlabrc is a good way of restoring default things that have been cleared. It does not provide a clearing mechanism and is therefore not a full reset. Jan’s answer attempts to clear everything and then use matlabrc to restore. Seems like a reasonable way to go.

What errors does matmatlabrc call startup?

MATLABRC calls STARTUP. Error in Connector: Did not start the server. Desired port was: 31515. Last error was: Error while Warning: Error in Connector: Did not start the server. Desired port was: 31515. Last error was: Error Warning: Failed to start the web server. This could be because of the Java virtual machine. Restart