How do I program my Ra2 dimmer?
To set up a RadioRA® 2 system, components must be added to the Main Repeater. First, add Auxiliary Repeater(s)*; then add all other system devices. Press and hold the Add button on the Main Repeater for 3 seconds until the green Add LED begins to rapid-flash (ten times per second) and the Repeater beeps.
Is RadioRA compatible with Caseta?
According to the email I got back from Lutron, Caseta is in no way compatible with Ra2 Select. Supposedly Ra2 Select’s dimmers are compatible so it provides them with some upgrade path but you’re right about Caseta.
What is the difference between Lutron Caseta and Ra2?
Caséta utilizes Lutron Clear Connect RF technology and does not use wired communication. Like Caséta, RA2 Select also utilizes a local control strategy (driven through Pico scene keypads or the Lutron App), utilizes Clear Connect, and does not use wired communication. RadioRA 2 utilizes a local control strategy too.
How many time clock modes can run at any point in time Lutron?
“Timeclock” buttons are used to set a different mode for the timeclock for a variety of purposes, such as holidays, parties, or going on a vacation. Status LED will be ON when the assigned timeclock mode is active. (only one mode can be active at a time).
How do I reset my Lutron RadioRA 2 dimmer?
Step 1: Quickly triple tap and hold the Test or Light button on the Sensor. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second). The Sensor has now been returned to Factory Default Settings.
Do Caseta switches work with RA2?
RF Maestro switches and dimmers are compatible with Lutron RA2, but not Caseta. While Caseta’s switches and dimmers are multifunctional, the RA2’s Lutron RF Maestro switches and dimmers are next level.
Does Caseta work on ra3?
The answer is yes. The new RadioRA3 processor will be backwards compatible with up to 95 RadioRA2 devices, but will also be capable of using the new Sunnata RF devices. This means that by waiting for the RadioRA3 processor, you will gain to the oppurtunity to use all the new Lutron product releases going forward.
What software is used to program a RA2 select system?
RA2 Select main repeater and the Lutron App The RA2 Select main repeater allows for setup, control, integration and monitoring of in-line dimmers and switches, Pico scene keypads, and wireless blinds from a smartphone or tablet using the Lutron App.
How do I reset my RadioRA 2 main repeater?
RadioRA 2 Main Repeater (IMPORTANT: refer to Best Practices before proceeding!) Step 1: Quickly triple tap and hold down any button on the Main Repeater. DO NOT release after the third tap. Step 2: Continue to hold the button for a few seconds.
How many devices can you have on Lutron Ra2?
Supports up to 100 wireless devices (including select RadioRA 2 dimmers and switches, RF modules, Pico wireless controls, wireless sensors, and wireless shades). The main repeater and additional wireless repeaters each count as one device. Programmed via the Lutron App (available for iOS® and AndroidTM).
Does Lutron Maestro work with Caseta?
The Maestro and Caseta are not compatible. All you need to do on the pico wiring is just to tie the 3 wires together. Very easy. Lutron has pretty good instructions on what to do.