What are the specs on a 12 valve Cummins?
5.9L Cummins 12v (6BT) Engine Specs
| Engine: | Cummins 6BT (commonly referred to as the “12 valve Cummins”) |
|---|---|
| Horsepower: | 160 – 215 HP @ 2,500 RPM |
| Torque: | 400 – 440 lb-ft @ 1,600 RPM |
| Governed Speed: | ~ 2,700 RPM |
| Engine Weight: | ~ 1,100 lbs, dry & dressed (~ 890 lbs dry, engine assembly only) |
How much horsepower does a 5.9 12 valve Cummins have?
The Cummins 5.9-liter 6BT 12 valve has 230 HP, 440 lb-ft of torque, and a P7100 inline injection pump right out of the box. The 12-valve is also a popular engine swap choice, powering a slew of Jeep, rat rod, muscle car, and dragster projects.
How much boost can a 12-valve Cummins hold?
Stock you won’t see much more than 25psi. Depending on the turbo you currently have you don’t want to run above 32-35psi. Turbo’s don’t make more boost. Fuel makes more boost.
Which year 12 valve Cummins is best?
1996-1998 has the best injection pumps (perhaps ignoring the 1989-1993 VE) and stronger automatics compared to earlier years. Look at the buyers guide section in the thread below. The 1998 12 valve trucks were only built in 1997.
How fast is a stock 12-valve Cummins?
Registered. Mine is about 120 mph.
How much is a 12v Cummins worth?
How Much Does A 12V Cummins Swap Cost? Diesel Cummins conversions can vary widely, often reaching $5,000-$10,500 each.
How do I get more boost on my 12 valve Cummins?
With your stock fueling you can push the turbo to more than 20psi. If you interupt the signal to the wastegate diaphram you should be able to get another 5-10 psi out of it. once you get there, then, yes the addition of fuel will result in more boost and more power.
How many valves does a Cummins Engine have?
The new 5.9L Cummins engine had 24 valves, or 4 valves per cylinder. The mechanical “P-Pump formally known as the Bosch P7100 fuel injection pump was replaced with a rotary electric VP44 injection pump.
How much horsepower does a 1998 Cummins Cummins have?
Trucks from 1998 with automatic transmissions make 215 horsepower and 420 lb-ft of torque. Cummins dramatically changed the late 2nd Gen Cummins engine. By doubling the valves, overall performance improves. Drivability improves because of better throttle response.
What kind of engine does a Dodge Cummins have?
Following the 1st gen Cummins footsteps was no small task. Dodge had immense success with the first 5.9L Cummins engine and the D250/350 trucks, and they had to keep the momentum going. As a result, they kept the 5.9L Cummins and made some adjustments to improve them.
What kind of Turbo does a 24 valve Cummins have?
The 24 Valve 5.9L Cummins used the same turbocharger as 12V models from 1994-1998. The Holset HX35W was used on all models until 01′ and 02′. In these years, trucks with automatic transmissions used a HY35W turbocharger. High Output 24V 5.9L Cummins