Can you use Expo markers on Quartet boards?

Can you use Expo markers on Quartet boards?

Can non-Quartet brand markers be used on Quartet glass boards? Yes, other glass board markers are compatible with our glass boards.

How do you mount a whiteboard without screws?

You can hang whiteboard with industrial strength velcro. I buy the role at Home Depot that is rated to hold 10 lbs. Because it is attaching to the wall, there is not 10 lbs of weight actually on the velcro strips. I put them on every corner and one in the center top and bottom and left and right.

How do you attach a whiteboard to a command strip?

Place Command Strips on the back of the board, on all sides of the frame and at the corners. Peel the protective film off the Command Strips. Press the board firmly to the wall, making sure it lines up with the level line you drew. Once the board is firmly in place, your job is complete.

How do you attach a whiteboard to a brick wall?

The best way to hang a whiteboard on a concrete wall is to use screws secured with masonry anchors. Set your masonry anchors by marking the places on the wall where the screws must be inserted to secure the whiteboard. Then, use a masonry drill bit to pre-drill holes for the anchors.

How do you mount on blackboard?

1. Determine where you wish to hang the chalkboard. Remove all obstacles, especially if a ladder or step stool is needed to reach the desired spot on the wall.
2. Use a stud finder to find studs in the wall.
3. Lift the chalkboard into place.
4. Pre-drill screw holes in the chalkboard.
5. Lift the chalkboard back into place.

Can you use a wet erase marker on a dry erase board?

Wet erase markers contain water-soluble dyes and are intended for acetate, film or non-porous laminated surfaces. Wet erase markers can only be removed with a damp tissue or cloth. Dry erase markers erase with an eraser on most non-porous materials, like whiteboards, porcelain, melamine and glass.

How do you hang a board without nails?

No Nail, No Fail Options

1. Command Strips. This is probably the most commonly used method of hanging up frames, canvases, and any other decor without leaving a trace on the wall.
2. Command Hooks.
3. Hang Art From Your Molding.
4. Use Your Mantle.
5. Take Up Space on Bookshelves.
6. Embrace the Wall Lean.
7. Put the Art on an Easel.
8. Clip it Up.