How do you use the Samsung Soundbar remote?

How do you use the Samsung Soundbar remote?

Control your soundbar using your Samsung TV remote

1. Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV.
2. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar.

How do I adjust the volume on my Samsung Soundbar?

Sound volume

1. To adjust the volume for a speaker, press LEVEL on the remote.
2. Select a speaker by pressing the Left or Right button on the remote.
3. Adjust the volume of a speaker by pressing the Up or Down button on the remote.

How do I know if my Samsung Soundbar remote is working?

Now, press any button on the remote and observe carefully to see if you see the Infrared beam from the Remote as it flashes on the screen of the digital camera. If the Infrared light of the Remote can be seen on the camera’s LCD screen, it indicates that the Samsung Soundbar Remote is working properly.

Can you control volume of a Soundbar with TV remote?

An HDMI ARC connection makes controlling your soundbar from your TV remote simple, and after your connection is made through the cable, you should immediately be able to hear your TV’s sound coming through your soundbar.

What is the woofer button on Samsung remote?

Increase the bass or woofer level. Most soundbar remotes have a button labeled WOOFER that can adjust the level from -6 to +6 (when compared with the volume of the rest of the sound from the other speakers). If your remote does not have this button, see your user manual for instructions.

How do I increase the volume on my Samsung TV remote?

If this does not work, go to the menu using your Samsung TV remote. Select sound from there and then select either additional settings or speaker settings and set the auto volume to normal (Sound > Additional Settings/Speaker Settings > Auto Volume > Normal).

Why is my Samsung remote control not working?

Remove the batteries and then press Power for 8 seconds to reset the remote. Then reinsert the batteries and try to use the remote again. Check out the user manual if you need help accessing the battery compartment. 2 Check to see if the remote is sending an infrared (IR) signal.

Why is the remote control not working?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

How do I get my soundbar to turn on and off with TV?

In order to make your Soundbar turn on simultaneously with your TV, you need to verify if you are using an optical cable connection or an HDMI ARC connection….Optical Cable Connection

1. Plug in the optical cable.
2. Ensure that Auto Power Link is turned on.
3. Turn on the D.IN mode on your Soundbar.
4. Adjust the TV speaker settings.

How do you adjust the subwoofer on a Samsung soundbar?

To adjust Treble, Bass, or the Audio Sync; To control the volume of the treble or bass sound, select TREBLE or BASS in Sound. Settings, and then adjust the size between -6~+6 by using the Up/Down buttons. > Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band.